AIRpipe Garage Kit · Single Workstation
1-Station Compressed Air Piping Kit
Build a clean, reliable single-drop compressed air line without guessing which AIRpipe components you need. This preconfigured layout includes the core pipe, connectors, elbows, mounting clips, outlet station and compressor connection adapter needed for one primary garage, shop or workstation air outlet.
The kit builds the fixed compressed air distribution system. After the outlet station is installed, complete the workstation with the hose reel, hose, regulator, couplers or manifold required by the tools used there.
Example layout shown. Customize quantities, pipe lengths, fittings and outlet stations directly from the cart page.
One Fixed Air Outlet
What Is a 1-Station AIRpipe Piping Kit?
A 1-station compressed air piping layout connects your compressor to one dedicated AIRpipe outlet station. It is a good starting point when you need compressed air at one primary workbench, garage bay, maintenance area or small production cell.
Cleaner Layout
Route compressed air overhead or along the wall instead of relying on one long hose from the compressor.
Easy Expansion
Start with one outlet station and add pipe runs, branches or additional drops later as the workspace grows.
One-Click Component Cart
Load the recommended AIRpipe component list into the cart instead of locating each connector, elbow, clip and outlet station individually.
Understand What This Kit Builds
AIRpipe Piping Kit vs. Drop Station
The 1-Station Kit and the finished workstation are related, but they are not the same thing. The kit creates the fixed distribution path; the drop station completes the point of use.
This Kit Builds the Fixed AIRpipe System
The included components carry compressed air from the compressor to one outlet location.
- 1-inch aluminum AIRpipe
- Union connectors
- 90-degree elbows
- Pipe mounting clips
- One outlet station
- Compressor connection adapter
The Drop Station Finishes the Workstation
Once AIRpipe reaches the work area, complete the station according to the tools and airflow required there.
- Shutoff / isolation
- Filter or regulator
- Hose reel
- Air hose
- Plugs and couplers
- Optional manifold
Included 1-Station Component List
This preconfigured cart is based on a standard 1-station layout. Final installation may vary based on compressor location, wall layout, ceiling height, total run length and preferred outlet placement.
| Qty | Component | Purpose |
|---|---|---|
| 9 | 7' lengths of 1" blue aluminum pipe | Main air line and vertical drop |
| 4 | 1" union connectors | Connect pipe sections together |
| 10 | 1" pipe mounting clips | Secure pipe to wall, structure or mounting surface |
| 3 | 1" elbow connectors | Create directional turns in the piping layout |
| 1 | 1" outlet station with two 1/2" female NPT ports | Creates the working AIRpipe outlet location |
| 1 | 1" pipe to 3/4" male NPT adapter | Connects the AIRpipe system to the compressor |
After the AIRpipe Outlet
Complete Your 1-Station Drop
The AIRpipe outlet gets compressed air to the work area. These point-of-use components determine how the air is delivered from the fixed piping system to the tool.
Not Sure Which Components Your Workstation Needs?
Use the AIRpipe Drop Station Design Guide to work through required CFM and PSI, hose reach, reel placement, manifolds, fittings and point-of-use air preparation.
Who This 1-Station Kit Is Best For
Garage & DIY Users
A clean starting point for tire inflation, impact tools, blow guns, detailing and other garage projects.
Small Shops
Useful for one workbench, service bay, maintenance room or small production workstation.
Maintenance Teams
Creates a dedicated compressed air outlet where reliable access and organized hose routing are important.
Why Use Aluminum Air Pipe Instead of One Long Hose?
Long air hoses can create clutter, trip hazards and unnecessary pressure loss. A wall-mounted or overhead AIRpipe system gives compressed air a fixed distribution path and allows the flexible hose to begin closer to the actual work area.
Aluminum compressed air piping is also lightweight, corrosion resistant and modular, making it easier to change or expand than many traditional fixed-piping materials.
Need More Than One Air Drop?
If your garage, workshop or small shop needs compressed air in more than one location, compare these larger AIRpipe layouts before ordering.
Pair This 1-Station Kit With a Garage Air Compressor
Building a small garage or DIY compressed air setup? These Quincy compressors can support common tire inflation, air-tool, automotive, woodworking and light-shop applications. Always size the compressor around the actual CFM requirements of the tools you plan to operate.
Quincy 2 HP 24 Gallon Horizontal Portable
Portable 115V compressor for garages, tire inflation, air tools, automotive maintenance and DIY projects.
Quincy 2 HP 24 Gallon Vertical Portable
Compact vertical compressor that saves floor space while supporting common garage and workshop air needs.
Quincy Wheelbarrow PAT38 Honda GX160
Gas-powered portable compressor for larger garages, detached shops, farms, mobile service and outdoor use.
Compare the Full Garage Kit Family
Choose 1, 3, 4 or 5 AIRpipe Outlet Stations
Compare all of the preconfigured garage layouts if you are still deciding how many work areas should have their own compressed air outlet.
Continue Building the System
Related AIRpipe & Drop Station Resources
Common Questions
1-Station AIRpipe Kit FAQs
No. This page creates a convenient preconfigured cart using the individual AIRpipe components needed for a common 1-station compressed air piping layout.
Yes. This type of 1-station layout can work well in garages, small shops, maintenance areas and single workstations. Always verify compressor connection, available space, airflow requirements and installation conditions.
This component list is based on 1-inch blue aluminum compressed air pipe with compatible 1-inch fittings and an adapter for compressor connection.
The 1-station kit is focused on the fixed AIRpipe distribution system. Depending on the workstation, you may still need a hose reel, air hose, regulator, filter, couplers, fittings or manifold to complete the point-of-use drop.
Yes. The image represents a concept layout. You can adjust pipe routing, outlet location and fittings based on your garage or shop configuration.
Yes. Modular aluminum compressed air piping systems can be expanded with additional pipe, connectors, branches, drops and outlet stations. Confirm the compressor and existing piping have enough capacity for the additional airflow demand.
Yes. This example includes a 1-inch pipe to 3/4-inch male NPT adapter. Confirm your compressor outlet size and connection requirements before ordering.